Unitec Portal Installation Manual - Manual (Page 50)

P O R T A L T I
Portal Installation Manual Rev C 46
Appendix F. Installation of the External POS
The external POS Interface device allows codes to be purchased at registers or
pumps (points of sale, or POS). The Ethernet port connects to the Unitec router; the
serial port connects to the C-store POS System. A standard 9-pin serial cable is
included with the POS device but some systems may require an alternate cable (or
adapter). Contact the POS manufacturer for their cabling requirements.
Refer to Appendix C for guidance in connecting the External POS device to the
Unitec router. Refer to the Sierra Management Application Programming Manual for
for instructions on configuring the POS software interface to the POS system.
External POS Interface Device
Document #: PTL1001