Unitec Portal Installation Manual - Manual (Page 39)

P O R T A L T I
Portal Installation Manual Rev C 35
Appendix B. IPTran Installation
With the purchase of the Credit option, you will receive an IPTran credit processing
device separate from the Portal TI unit. The IPTran is shipped separately as it needs
to be configured at Unitec with the merchant account and processor information. To
install the IPTran, you will first mount it to the hopper cage, and then connect the
power and communications cables.
M o u n t t h e D a t a T r a n
1. Mount the modem bracket to the screws located on the side of the hopper
cage.
Location of IPTran Modem
2. Slide the DataTran into the mounting bracket with the cable ports facing
forward.
3. Tighten the nuts holding the mounting bracket to the hopper cage.
Document #: PTL1001