Connect the cables, Connect the cat5 line to the datatran – Unitec Portal Installation Manual User Manual
Page 40
P O R T A L T I
Portal Installation Manual Rev C
36
C o n n e c t t h e C a b l e s
IPTran Wiring
1.
Connect the CAT5 line to the Datatran.
2.
Connect the modem communication cable to the communications port on
the DataTran
3.
Plug the other end of the communications cable (with the DB9 connetor)
into Com 3, Port A of the Carrier Board. This is the top DB9 input, labeled
CN11, Channel A .
Document #: PTL1001