Unitec Portal Installation Manual - Manual (Page 43)

P O R T A L T I
Portal Installation Manual Rev C 39
When a router (or modem with built-in router) is used between the Unitec router and
broadband connection, it must be configured to allow external connections to and
from the Portal. The router should be configured to:
• Forward the ports assigned to the Portal(s) to the Unitec router. For a single
unit installation the port is 9810. In multi-unit sites, the ports would increment
for each Portal i.e. 9811, 9812 etc..).
• Provide a static/reserved IP address to the Unitec router reserved so that the
forwarded ports will always be directed to it.
Document #: PTL1001