Tweco 9-9418 - Manual (Page 5)

Manual 0-4737 5
SW6: OK-to-Move: Contact closure, 120VAC @ 1A (Factory default setting) or
DC Volts (16-18vdc@ up to 100 ma.)
SW11: Analog Current Control. B = from Gas Control (Factory default setting) or A = from CNC.
Position A requires that SW-8-2 be ON.
SW12-1/2/3/4: Divided Arc signal All = OFF = 50:1 (Factory default setting)
1 = ON = 16.6:1
2 = ON = 30:1
3 = ON = 40:1
4 = Not used.
Art # A-07673
Only 1 on at a time.
SW11
SW13
SW6
SW12
SW13: TVA and XTL Switch positions
SW13
1 2 1 2
TVA XTL TVA
NOTE
Standoff Control SC-11 requires Switch 12-1 set to ON.
Reinstall the power supply side panel. Reconnect input power. Test the system for proper operation.