Tweco 170 HF Weldskill - Manual (Page 16)

WELDSKILL 170 HF INVERTER
2-4 April 23, 2008
2.10 Specifications
Description Weldskill 170 HF Inverter
Power Source Part Number W1003000
Cooling Fan Cooled
Welder Type Inverter Power Source with High Frequency
Welding Power Source Mass 7.5kg
Dimensions L 380mm x W 130 x H 255
Manufactured to Australian Standard AS60974.1-2006
Number of Phases Single Phase
Nominal Supply Voltage 240V ±15%
Nominal Supply Frequency 50Hz
Welding Current Range 5 - 170 Amps
Factory Fitted Supply Plug Rating 15 Amps
Effective Input Current (I1eff) 15 Amps
Maximum Input Current (I1 max) 31 Amps
Single Phase Generator Requirement 10 KVA
Welding Output, 40°C ,10 min.
(quoted figures refer to MMAW
output) 170A @ 25%, 26.8V
110A @ 60%, 24V
85A@ 100%, 23.4V
Protection Class IP23S
NOTE
Due to variations that can occur in manufactured products, claimed performance, voltages, ratings,
all capacities, measurements, dimensions and weights quoted are approximate only. Achievable
capacities and ratings in use and operation will depend upon correct installation, use, applications,
maintenance and service.