Tweco 186 AC/DC Thermal Arc - Manual (Page 12)

STICK Setup
Slide
12
1. Connect the Electrode Holder lead
to the positive welding terminal (+). If
in doubt, consult the electrode
manufacturer. Welding current flows
from the Power Source is heavy duty
bayonet type terminals. It is essential,
however, that the male plug is
inserted and turned securely to
achieve a sound electrical connection.
2. Connect the work lead to the
negative welding terminal (-). If in
doubt, consult the electrode
manufacturer. Welding current flows
from the power source is heavy duty
bayonet type terminals. It is essential,
however, that the male plug is
inserted and turned securely to
achieve a sound electrical connection.
3. Select STICK mode with the
process selection control
.