Triton TA 235CSL - Manual (Page 3)

2
GB
Thank you for purchasing this Triton tool. This manual contains information necessary for safe and
effective operation of this product. This product has unique features and, even if you are familiar
with similar products, it is necessary to read this manual carefully to ensure you fully understand the
instructions. Ensure all users of the tool read and fully understand this manual.
CONTENTS
SPECIFICATION
Contents / Specification
Specification 2
Product Familiarisation 3
General Safety 4
Symbols 6
Intended Use 6
Unpacking Your Tool 6
Before Use 7
Operation 8
Accessories 9
Maintenance 9
Troubleshooting 10
Warranty 11
Part No. TA235CSL
Voltage: 230V - 240V AC, 50Hz, 10.5A
Input power: 2300W
No load speed: 4500min -1
Blade diameter: 235mm
Blade bore diameter: 30mm
Blade teeth: 40 TCT
Blade kerf: 2.2 – 3.5 mm
Bevel adjustment: 0° to 45°
Positive bevel stops: 0°, 15°, 22.5°, 30° and 45°
Cutting capacity at 90°: 82mm
Cutting capacity at 45°: 58mm
Insulation: Double insulated
Net weight: 7.7kg
Laser: Class 2
Wave length: 650nm
Output power: ≤1mW
Sound and Vibration Information
Sound pressure (L
PA
): 97.1dB(A)
Sound power (L
WA
): 108.1dB(A)
Uncertainty: 3dB
Weighted vibration(a
h
): 2.470m/s 2
Uncertainty K: 1.5m/s 2
As part of our ongoing product development, specifications of Triton products may alter without notice.
The sound intensity level for the operator may exceed 85dB(A) and sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the time of exposure if necessary. If sound levels are uncomfortable, even with ear
protection, stop using the tool immediately and check the ear protection is correctly fitted and provides the correct level of sound attenuation for the level of sound produced by
your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness, tingling and reduced ability to grip. Long term exposure can lead to a chronic condition.
If necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not operate the tool with hands below a normal comfortable temperature, as vibration
will have a greater effect. Use the figures provided in the specification relating to vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or similar international standards. The figures represent normal use for the tool in normal
working conditions. A poorly maintained, incorrectly assembled, or misused tool, may produce increased levels of noise and vibration. www.osha.europa.eu provides information
on sound and vibration levels in the workplace that may be useful to domestic users who use tools for long periods of time.
TA235CSL_Z5MANPRO1_V2.indd 2 06/11/2013 12:23