Trail Master Suspension TM407N FORD F-150 4WD 6 SUSPENSION LIFT KIT - Manual (Page 20)

20
TM407N
Revised
6.14.13
e. Drill out small hole just in front of spring
pivot bolt to 5/16”.
f. Install kit parking brake cable bracket
over leaf spring pivot bolt and secure with
pivot nut and kit 5/16” x 1” bolt & hard-
ware.
g. Install driver side parking brake cable into
kit parking brake bracket the same way it
was removed from OE and reconnect it.
8.Install rear lift blocks.
a. Making sure differential is supported by
jack loosen and remove U-Bolts on one side
of vehicle.
b. Slowly lower axle about 5”. Remove OE
lift block.
c. Install kit rear lift block.
Drill hole
to 5/16”
Leaf spring
pivot bolt
Kit 5/16” x 1” Bolt &
hardware
2004-2005 Models
2006 Models
Kit Parking
Brake Bracket
82-TM241011