Trail Master Suspension TM407N FORD F-150 4WD 6 SUSPENSION LIFT KIT User Manual

Page 14

TM407N

Revised

6.14.13

f. Install OE coil seat, kit striker pad and OE

bump stop onto new strut in same fashion as

originally removed from OE strut.

g. Using coil compressor compress coil and

slide strut into position until threads are ex-

posed through top. Secure with nut.

11. Install shocks

a. Install three upper studs into factory

pocket and secure using OE nuts removed

during disassembly.

b. Pivot lower control arm up and in line with

lower strut mount, secure with OE bolt re-

moved.

12. kit knuckle on vehicle.

a. Insert upper and lower ball joints through

kit knuckle and secure using OE ball joint

nuts. Do not tighten at this time.

Kit Bushings

Kit Sleeve

OE Spring Pad

OE Bump stop

Kit Striker pad

Lower mount
using OE bolt

Upper mounting studs
& nuts Lower mount
using OE bolt

Upper
Ball joint

Lower
Ball joint

Kit
Knuckle
241001
Drvr and
241002
Pass

Kit Strut
75700