Trail Master Suspension TM407N FORD F-150 4WD 6 SUSPENSION LIFT KIT - Manual (Page 16)

16
TM407N
Revised
6.14.13
c. Position kit axle spacer on half shaft. No-
tice there’s a male and female end to index
the spacer, install it appropriately.
d. Bolt axle half shaft & kit axle spacer to
differential using kit 12mm x 45mm Gr10.9
bolts & 12mm flat washers supplied.
e. Rotate tie rod end so that threaded end is
facing down and install tie rod into knuckle
steering arm. Use OE nut to secure. Do not
tighten at this time.
Axle Nut
Differential
Axle Half
Shaft
Kit Axle Spacer
82-TM241015
Kit Bolts
Axle Half
Shaft
Kit Knuckle
Steering Arm
Tie Rod