Trail Master Suspension TM407N FORD F-150 4WD 6 SUSPENSION LIFT KIT - Manual (Page 12)

12
TM407N
Revised
6.14.13
8. Install lower control arms on both sides of
vehicle.
a. Slide lower control arm into pockets on kit
front & rear crossmembers.
b. Mount lower control arm using kit 18mm
“D” bolts, cam washers, flat washers, and
18mm nuts.
9.Install kit sway bar drop brackets.
a. Install kit sway bar drop bracket to frame
with flat surface facing towards outside of
vehicle. Secure the bracket to frame using
OE hardware removed.
b. Repeat on opposite side of vehicle.
c. Secure sway bar to kit sway bar drop
brackets using 7/16” x 1-1/4” bolts & hard-
ware.
10. Assemble struts.
WARNING
Compressed coil springs can expand violently causing
serious personal injury. Before removing the coil
springs, lower the axle housing as far as possible to al-
low the coil springs to expand. Use caution when using
coil spring compressors.
Kit Differential
Bracket
82-TM241008 Front Facing
Bolts
Lower Control
Arm
Kit 18mm D Bolts
& Hardware
Kit Sway Bar
Drop Bracket
82-TM241006
OE Hardware
Sway Bar
Kit Sway Bar
Drop Bracket