Input delay, Audio in puts – Sound Devices PIX 220i User Manual
Page 24
3. Turn the Control Knob to adjust the gain value up or down. This adjustment will affect gain
in real-time.
4. Push the Control Knob to exit the gain control field.
Input Delay
Inputs 1 to 4 can be delayed up to 500 milliseconds. This is useful for aligning audio that enters the
PIX recorder in real time with video from the output of a camera that can be delayed.
Below is a table indicating the input delay setting (milliseconds) required to compensate for different
amounts of video delay. The top row (1-10) indicates the amount of video delay in frames and the
left column corresponds to the frame rate being used. The boxes in gray are beyond the input delay
limit of the PIX recorder. It is unlikely that a camera would introduce a video delay greater than 500
ms.
1
2
3
4
5
6
7
8
9
10
60
17 ms
33 ms
50 ms
67 ms
83 ms
100 ms
117 ms
133 ms
150 ms
167 ms
59.94
17
33
50
67
83
100
117
133
150
167
50
20
40
60
80
100
120
140
160
180
200
30
33
67
100
133
167
200
29.97
33
67
100
133
167
200
24
42
83
125
167
208
23.98
42
83
125
167
208
When audio inputs are delayed, this delay applies to the recorded file and to the audio outputs. The
delay can be applied to the recorded file only (and not the audio outputs) be setting Setup Menu op-
tion Audio
Input Delay to Output
to Off.
PIX 220i and PIX 240i Video Recorder User Guide
22
v. 3.52
Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
A
udio In
puts