SONIQ F1000 - Manual (Page 8)

- 22 -
3.Display Setup
Select [Brightness]，set brightness of video Select [contrast]，set contrast of video
Select [TFT Brightness]，set brightness of LCD Select [TFT Contrast]，set contrast of LCD
Select [TFT Saturation]，set saturation of LCD
Set parameter
- 7 -
After power on, system enter standby status. Press “ ”, there will
be a main menu displayed.
This frame provides 11 functions including 【 Photo】【 Music 】
【 Photo +Music】【 Movie】【 Edit 】【 Setup 】【 Calendar】
【Clock】【Alarm】【Auto-Power】【 Favorite】.Following pictures for
your reference:
It will search storage device when entering 【 Photo】【 Music 】
【 Photo+Music】【 Movie】. Frame will quit to main menu if no
storage device was searched within 10 seconds. It will read and play files
while finding any storage device.
1.Photo
After choosing 【Photo】 from the main menu, press the "ENTER"
key, and the system will automatically detect whether or not a storage
device has been connected (USB drive or memory card). If no storage
device has been connected, the system will go back to the main menu.
After the storage device has been connected and correct read/write
access has been confirmed, the system will enter the mode chosen by
the user . section for settings details). If the user has selected 【File
Mode】for playlist management, the screen on the lower left will appear;
if the user chooses 【 Browse Mode 】 for playlist management, the
screen on the lower right will appear.
Under 【Photo】 mode, the system only supports the display of
Main function