Soleus Pulse HRM (SH006) - Manual - Manual (Page 9)

RDY14
Setting the UNIT:
• Press S5 while UNIT is blinking. KM or MI will start to blink.
• Press S1/S11 to change the value.
• Press S5/S7 to confirm and the watch will go back to UNIT setting screen.
Setting the USER’s information:
• Press S5 while USER is blinking. MALE or FEMALE will start to blink.
• Press S1/S11 to change the gender.
• Press S5/S7 to set the AGE. Age digits will start to blink.
• Press S1/S11 to change the age digits.
• Press S5 to set the WEIGHT. Weight digits will start to blink.
• Press S1/S11 to change the weight digits.
• Press S5 to set the HEIGHT. Height digits will start to blink.
• Press S1/S11 to change the height digits.
• Press S5/S7 to confirm and the watch will go back to USER setting screen.
Setting HRM:
• Press S5 while HRM is blinking. ZONE 1 will start to blink.
• Press S1/S11 to change the zone. There are 3 preset zones
• Press S5/S7 and the watch will display the LOWER limits of the selected zone.
LOW limit digit will start to blink.
• Press S1/S11 to change the low limit value.
• Press S5 to confirm. High limit digit will start to blink.
• Press S1/S11 to change the high limit value.
• Press S5 to confirm. The watch will display ZONE ALERT ON or OFF.
• Press S1/S11 to change ON to OFF or vice versa
• Press S5/S7 to confirm and the watch will go back to HRM setting screen.
Setting the NIGHT mode:
• Press S5 while NIGHT is blinking. 10 sec will start to blink.
• Press S1/S11 to change to 20 sec or NIGHT ON.
• While on 10 SEC or 20 SEC setting, Press S5 to accept the setting and go back to
NIGHT setting screen.
• Press S5 to set the START and END time for continuous light ON. NIGHT START
TIME will start to blink.
• Press S1/S11 to change to NIGHT START TIME. 3 seconds auto or press S5, the
HOUR digit will start to blink.
• Press S1/S11 to change the hour setting.
• Press S5 to change the MINUTE. Minute digits will start to blink.
• Press S1/S11 to change the minute setting.
• Press S5 to go back to NIGHT setting screen.
Light conditions for the various night mode settings:
10 SECONDS – Press S11 will turn ON the Light for 10 seconds.
20 SECONDS – Press S11 will turn ON the Light for 20 seconds.
NIGHT ON – Light will continuously ON when CHRONO is running within the preset
duration time (5:00 pm to 7:00 am). However, the User can opt to manually set the Night
time (Start time and End time).
Soleus Pulse HRM