Soleus Pulse HRM (SH006) - Manual User Manual
Page 11
RDY14
Setting the VIEW:
•
Press S5 while VIEW is blinking. The watch will display VIEW/DIST/ CHRONO.
CHRONO is blinking in line 3.
•
Press S1/S11 to change the information in line 3. You can select CHRONO,
Distance, HRM, CAL (Calorie), Pace, Speed, Step, Cal/Hr (Calorie/hour), Clock
and ODO (Odometer).
•
Press S5 to enter. Line 2 will start to blink.
•
Press S1/S11 to change the information displayed in Line 2. You can select
CHRONO, Distance, HRM, CAL (Calorie), Pace, Speed, Step, Cal/Hr
(Calorie/hour), Clock and ODO (Odometer).
•
Press S7 to exit.
Setting the GOAL CAL (Goal Calorie):
•
Press S5 while GOAL CAL is blinking. MALE will start to blink.
•
Press S1/S11 to change the gender.
•
Press S5/S7 to confirm and set the AGE. Age digits will start to blink.
•
Press S1/S11 to change the age digits.
•
Press S5/S7 to confirm and set the WEIGHT. Weight digits will start to blink.
•
Press S1/S11 to change the weight digits.
•
Press S5/S7 to confirm and set the HEIGHT. Height digits will start to blink.
•
Press S1/S11 to change the height digits.
•
Press S5/S7 to confirm and set the GOAL CAL. The 1st digit will start to blink.
(2nd digit up to the last digit blinks as you press S5).
•
Press S5 to confirm and go back to 1
st
setting screen of GOAL CAL.
•
Press S7 to exit.
Help Functions:
•
If the Heart rate data displayed in the watch is not stable or erratic, try to move
the watch along your forearm within the best wearing position as illustrated in
page 1.
•
Fasten the watch snugly so that the optical sensor makes a tight contact with
your skin. The tighter you can wear the watch the better.
•
Your skin should be no SCARS or any other object in your skin that will interfere
with the sensor.
•
The heart rate is taken directly through your skin to the watch sensor, so it is
very important that there are no obstructions that will interfere with the
transmission of the Heart rate data.
•
Try to wear the watch on your other wrist.
Charge Battery:
When the power is low (battery icon blinks), it is time to charge the battery of your watch.
The watch can be charged using the USB port and it takes about 4-5 hours to fully
charge the battery. Please charge the device before using and never to hit empty.
Once fully charged, the battery icon will stop blinking and turns to solid.
Battery life:
When the battery is fully charged, your watch can be used up to 20 hours of activities but
this will vary depending on Customer’s usage. Like for an instance, using the backlight
more frequently or all the time, the battery is used more quickly.
Battery Replacement
The battery on this device is not User replaceable and it is highly recommended by an
authorized service personnel only.
Water Resistant:
The watch can withstand up to 3ATM.
Water damage may occur if the buttons are pressed underwater.
Soleus Pulse HRM