Soleus Pulse HRM (SH006) - Manual User Manual
Page 8
RDY14
16) How to enter Alarm mode
Press S7 from
DATA mode to enter ALARM mode. The watch will display the alarm view.
The watch has five alarms that can be set individually.
•
Press S5 to view Alarm 1 to Alarm 5.
•
Press S1 to turn ON or OFF the selected alarm.
Alarm will sound for 20 seconds during alarm time. Pressing any button will stop the
sound without the button function.
Setting ALARM in ALARM mode:
•
Press and hold S11 and the watch will display HOLD TO SET. AL-1 will start to
blink.
•
Press S1/S11 to toggle through Alarm 1 to alarm 5. The watch has 5 alarms
which can be set individually
•
Press S5 to set the selected Alarm number. The HOUR digit will start to blink.
•
Press S1/S11 to change the hour digit.
•
Press S5 to confirm and set the MINUTE digit. The minute digit starts to blink.
•
Press S1/S11 to change the minute digit.
•
Press S5 to confirm and set the T1 or T2 setting. T1 or T2 starts to blink. The
alarm time will be referred to Time 1 or Time 2.
•
Press S5 to confirm. Daily Alarm ON or OFF will start to blink.
•
Press S1/S11 to change ON or OFF.
•
Press S5 to confirm to go to next setting (MON – SUN). Same setting procedure
above.
•
Press S7 to exit.
17) How to enter Set mode
Press S7 from
ALARM mode to SET mode. 1.5 seconds later the watch will display the
setting options. The ff. sequence are as follows;
AUTO LAP, TIME, UNIT, USER, HRM,
NIGHT, CONTRAST, CHIME, ALARM, TIMER, VIEW and GOAL CALORIE.
•
Press S1/S11 to toggle trough these parameter.
•
Press S5 to enter selected parameter to set.
•
Press S1/S11 to change values.
•
Press S7 to exit setting to Time mode.
Setting the Auto Lap:
•
While
AUTO LAP is blinking, Press S5 to set. “1 KM” will start to blink
•
Press S1/S11 to change values. Preset range for auto lap is 0.4, 1, 2, 3, 4, 5
KM. Default value is 1 KM,
•
Press S5 to confirm setting and exit to
AUTO LAP setting screen.
SETTING THE TIME:
TIME 1/ TIME 2 setting
•
Press S5 while TIME is blinking. The watch will display T1 or T2.
•
Press S1/S11 to choose between T1 or T2 to set.
•
Press S5 to set the selected time (T1 or T2). The HOUR blinks.
o
Set the HOUR by pressing S1 or S11 and press S5 to enter.
o
Set the Minute by pressing S1 or S11 and press S5 to enter.
o
Set the SECOND by pressing S1 or S11 and press S5 to enter.
o
Set the YEAR by pressing S1 or S11 and press S5 to enter.
o
Set the MONTH by pressing S1 or S11 and press S5 to enter.
o
Set the DAY by pressing S1 or S11 and press S5 to enter.
o
Set the 12/24H by pressing S1 or S11 and press S5 to enter.
o
Set the Month/Date of Date/Month format by pressing S1 or S11 and press S5
to enter.
o
Press S7 to exit.
Soleus Pulse HRM