Revel Voice 2 - Manual (Page 9)

Ultima Voice2
Owner’s Manual 9
The cabinet’s wood veneer finish does not require routine
maintenance. Cabinet surfaces that have been marked with dust,
fingerprints, or other dirt can be cleaned using a soft cloth and
high-quality wax.
• To clean the cabinet, apply furniture polish to a soft cloth
then use the cloth to lightly wipe the cabinet surface. Use care
to avoid coming into contact with the tweeter dome or other
drivers.
• To clean the grille, gently vacuum using a soft-bristled
brush vacuum attachment.
FILTER NETWORK
The Voice2 networks (crossovers) optimize both the on and off-
axis response, utilizing high-order filters at 235 Hz and 2 kHz.
These sophisticated networks help to ensure smooth octave-to-
octave balance and timbral accuracy. Separate woofer, midrange
and tweeter filter boards prevent mutual interference between
filter network components, dramatically reducing distortion over
a wide dynamic range. Gold-plated binding posts and shorting
straps accommodate single-wired, bi-wired, and bi-amplified
connections. Low Frequency Compensation and Tweeter Level
switches on the rear panel provide the ability to compensate for
acoustic effects due to various applications and loudspeaker
placement, as well as less-than-ideal listening room acoustics.
Caution
Use caution not to touch or allow any object or liquid to come
in contact with the Beryllium tweeter dome. Variations in its
finish are normal. Any attempt to clean the tweeter dome will
result in damage, which is not covered under the limited
warranty. To prevent cabinet damage, do not use a cloth made
with steel wool or metal polish to clean the cabinet. To prevent
possible transducer damage, do not apply furniture polish
directly to the cabinet or to the speakers.