Revel Voice 2 - Manual (Page 30)

Ultima Voice2
Owner’s Manual
A-2
PEDESTAL UNPACKING AND INSTALLATION INSTRUCTIONS
The Voice2 Pedestal is an optional accessory that provides optimum performance in stand-mounted applications. The following
instructions provide detailed information regarding how to unpack the Pedestal from its shipping container and how to install the Voice2
loudspeaker onto the pedestal.
UNPACKING THE PEDESTAL
Step 1: Place the packing carton upside-down
and fully open the bottom flaps.
Step 2: Without allowing the flaps to close,
invert the packing carton. Lift the packing
carton off of the pedestal, leaving the packing
material in place.
Step 3: To complete unpacking the pedestal,
remove the Unpacking & Installation
Instructions sheet from the end pad and refer to
the “Unpacking” instructions.
Step 4: Remove the Top End Pad from the top of the Voice2
pedestal.
Step 5: Lift the pedestal from the Bottom End Pad. Put both end
pads aside.
Step 6: Remove the cloth bag. Handle carefully to ensure that the
pedestal isn’t scuffed or bumped.
You are now ready to begin the Voice2 Pedestal installation
procedure. The Installation procedure begins on the following
page.
NOTE: Save all original packaging materials.
Accessory
Top End
Bottom End Pad
Protective Bag
Voice2 Pedestal
Bag
Pad