Flush mounted, On top of monitor, Figure 6: speaker placement - on top – Revel Voice 2 User Manual

Page 13: Flush mounted on top of monitor, Ultima voice2 owner’s manual 13 flush mounted

Ultima Voice2
Owner’s Manual

FLUSH MOUNTED

Set the Low Frequency Compensation switch to Flush if the
Voice2 loudspeaker is placed in a bookcase or wall unit as shown
in Figure 5 (below).

Figure 5: Speaker Placement - Flush Mounted

ON TOP OF MONITOR

Set the Low Frequency Compensation switch to Stand - if the
Voice2 Loudspeaker is placed on top of a video monitor as shown
in Figure 6 (below).

Note:
Reversible spikes/glides can be added to the bottom of the loudspeaker,
if desired. Refer to the “Combination Spike/Glides” for additional
information.

Figure 6: Speaker Placement - On Top

Rear Projection Screen

Large Direct-View Monitor

VOICE2

(Center)

Front

Left

Front
Right