Revel LFO - Manual (Page 17)

17 LFO Programming Software
User Guide
11. Use the Position Adjustment control to move the subwoofer Measured Response curve up or down in the display window so its overall shape overlays
the shape of the target curve as closely as possible (see illustration for Step 10).
12. If you need to increase the Frequency Response Display's visual resolution to see the curve details, select Plot Control, then decrease the Level (Y)
Axis's Max value and increase its Min value.
Level (Y) Axis
Controls
Plot Control
Tab
Applying Corrective Equalization
To apply corrective equalization to the subwoofer, select the Subwoofer adjustment tab. The subwoofer EQ fi lter window will appear.
Subwoofer Equalization Filter Controls
Subwoofer
Tab
EQ Filter Type
Selector
EQ Frequency
Selector
EQ Level
Selector
EQ "Q" and "BW"
Selectors
Subwoofer tab: Select this tab to perform corrective equalization (EQ) on the subwoofer. (For instructions to perform corrective EQ on the left and right
speakers (Left and Right tabs), see Measuring a Two-Channel System's Low-Frequency Response in Your Listening Room, on page XX).)
You can apply up to 10 different EQ fi lters to the subwoofer output. This sophistication makes it possible for you to create complex EQ curves that will
correct for a very wide variety of complex frequency-response anomalies.