Kessler MOUNTING & GRIP: Kwik Release System - Manual (Page 3)

Kwik Release with CineSlider
1. Locate the 9/64” allen key and two #8-32 x 1/2” Socket Head Cap Screws in the
Kwik Release Tool Kit
2. Line up the Kwik Release receiver with the holes on the cart as shown below.
3. Screw the two #8-32 x 1/2” screws through the receiver and into the cart as shown
Kwik Release with Pocket Dolly v2.0, Stealth & Philip Bloom
1. Locate the 9/64” allen key and two #8-32 x 1/2” Socket Head Cap Screws in the
Kwik Release Tool Kit
2. Line up the Kwik Release receiver with the holes on the cart as shown below.
3. Screw the two #8-32 x 1/2” screws through the receiver and into the cart as shown