beautypg.com

Important safety instructions, Danger, Warning – Brother VX 1400 User Manual

Page 2

background image

"IMPORTANT SAFETY INSTRUCTIONS"

When using the sewing machine, basic safety precautions should always be followed,

including the following:

"Read all instructions before using."

DANGER –

To reduce the risk of electric shock:

1.

The sewing machine should never be left unattended when plugged in. Always unplug this sewing machine from the
electrical outlet immediately after using and before cleaning.

2.

Always unplug before changing the light bulb. Replace bulb with same type rated 15 watts.

WARNING –

To reduce the risk of burns, fire, electric shock, or injury to persons:

1.

Do not allow this machine to be used as a toy. Close attention is necessary when the sewing machine is used by or
near children.

2.

Use this sewing machine only for its intended use as described in this manual. Use only accessories recommended
by the manufacturer as contained in this manual.

3.

Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped
or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer or service center for
examination, repair, electrical or mechanical adjustment.

4.

Never operate the sewing machine with any of the air openings blocked. Keep the ventilation openings of the sewing
machine and foot controller free from the accumulation of lint, dust and loose cloth.

5.

Never drop or insert any object into any openings.

6.

Do not use this machine outdoors.

7.

Do not operate this machine where aerosol (spray) products are being used or where oxygen is being administered.

8.

To disconnect, turn the main switch to the symbol “O” position which represents off, then remove plug from outlet.

9.

Do not unplug by pulling on the cord. To unplug, grasp the plug and pull, not the cord.

10. Keep fingers away from all moving parts. Special care is required around the sewing machine needle.
11. Always use the proper needle plate. The wrong plate can cause the needle to break.
12. Do not use a bent needle.
13. Do not pull or push the fabric while stitching. It may deflect the needle causing it to break.
14. Switch the sewing machine to the off, symbol “O” position when making any adjustments in the needle area, such as

threading the needle, changing the needle, threading the bobbin, or changing the presser foot.

15. Always unplug the sewing machine from the electrical outlet when removing covers, lubricating, or when making any

other user service adjustments mentioned in this instruction manual.

"SAVE THESE INSTRUCTIONS"

"This sewing machine is intended for household use."