Gossen Digiflash User Manual

Page 14

GOSSEN Foto- und Lichtmeßtechnik

– Use the key M to set the hours and

confirm with the function button.
The read-out "minutes" in the display
will flash.

– Use the key M for setting the minutes. To

confirm settings hold down the function
button until the OK-signal is heard.

ALARM CLOCK
– Use function button to enter the function

"ALARM CLOCK" and hold it pressed
down until the OK-signal will sound.
The time of the alarm clock is set in the
same way as the watch.

– Hold the function button until the

OK-signal sounds.

– The alarm is activated or deactivated

with the measuring button.

– When the alarm is activated it is shown

in the display with a bell symbol.

– When the alarm is sounded it will sound

each second for 1 min. It can be stopped
by pressing either the measuring key or
the function button.