Gossen Digiflash - Manual (Page 10)

GOSSEN Foto- und Lichtmeßtechnik 10
2.4 Taking a measurement
outside the measuring range
The Digiflash will not produce any useable
readings outside its measuring range:
in the display Eu (too dark) or E
n (too bright)
will appear.
2.5 Contrast measurements
– Use the Function button to select the
function "Exposure ambient light".
– Keep the measuring key M pressed down
and the meter will switch over to contrast
measurement. Continue holding down
the key to measure various other areas in
the subject. In the display, the difference
between the individual results of the
additional measurements and the first
measuring value will be indicated in EV.
A new metering will be made approx.
2 times a second.
After you have released the measuring key
M, the value of the first exposure measure-
ment will reappear.