GBC Stl1000 - Manual (Page 9)

8
3. Specifications
Use this section to determine proper installation requirements as well as the capabilities
of the STL-1000.
3.1 Purpose
The STL-1000 is designed to automatically supply spool fed Twin Loop elements cut to a
specified length and is automatically staged for the next book to be bound.
Operator hung pre-punched documents are transported to the closing area, bound and are
transported from the bind area to a stacking conveyor.
3.1.1 Dimensions
Machine only: 85” L x 56” W x 50” H (2.16M x 1.42M x 1.27M ).
Smallest doorway machine will fit through 40” (1.016M) wide (with the removal of the
spool holder assembly). NOTE: This unit should only be removed by a GBC service
tech.
Recommended work area: 10 ft. x 10 ft. (3.05M x 3.05M).
Shipping: 65” x 91” x 60” high (1.65M x 2.31M x 1.52M).
3.2.2 Weight
Weight (machine only): 1200 lbs. (545.6Kgms.)
Shipping weight: 1350 lbs. (613.6Kgms.)
3.3 Electrical Power
2.3.1 Voltage 2.3.2 PHASE 2.3.3 Current 2.3.3 Short circuit interrupt
220 VAC, 60Hz 3 15 amps capacity: 2000 A