GBC Stl1000 - Manual (Page 3)

2
19 Exploded Assembly and parts list conveyor………………..……….……63
20. STL- 1000 Field Problem Report Form……………………………..……… 69
21. Electrical Diagram………………………………………………………………70
22 Electrical Parts Layout…………………………………………………..….…72
NOTES………………………………………………………………………….…75
Your safety as well as the safety of others is
important to us at GBC. In this Service Manual and on
the STL1000 itself are important safety messages.
Please read these message carefully.
The Safety Alert symbol precedes each
safety message in this manual. This symbol
indicates a potential safety hazard that
could injure you or others, as well as cause
product or property damage.
This safety message means that you could be
seriously hurt or killed if you open the electrical
enclosure and expose yourself to hazardous voltage:
This safety message means that your hands could be
crushed and cut if you place your hands in the area of
moving parts:
The following ISO and IEC symbols appear on this
product.. Their meaning is:
“I” means Power On
“O” means Power Off
“ ! “ means emergency stop
“
o
“ means dereel
Do not connect electrical power to the STL1000 or
attempt to operate it before reading this Operators
Manual or you have been fully trained as an operator.
Save the operator’s manual for future
use and referral.
Keep hands, long hair, neckties, and loose
articles away from moving parts.
Never override or attempt to defeat electrical or
mechanical interlock devices
Never insert objects or spill liquids into the
STL1000. They may contact dangerous voltage
or short out components, resulting in fire or
dangerous shock.
Connect the STL1000 only to the electrical
supply shown in the machine specification
section of this manual and the Serial/Rating label
on the equipment. Connect to a power outlet
installed near the equipment and easily
accessible.
Connect the plug only to a matching receptacle,
contact a qualified electrician to have one
installed.
Turn the STL1000 power “Off” (O) at the end of
each day.
Do not attempt to service the STL1000. Contact
an authorized GBC service representative if any
of the conditions listed below are encountered:
Marty Moore
FOR YOUR SAFETY