GBC Stl1000 - Manual (Page 29)

28
2. The size gauge is used to accurately adjust the closing height. After closing a sample book, you may
need to make further fine adjustments to get the proper closing of the wire. See figure 13-2 for
proper closing of Twin Loop elements.
3. Never cycle the closing ram under power without checking the size gauge first.
FIGURE 13-1 FIGURE 13-2
14. Loading the Book
Books with 2-Piece Flush Cut Covers:
Stack the books with the front covers up; rotate the back cover to the top (see Figure 14-1). This
ensures that the wire loop closure will be inside and in the back of the book.