E-flite ElectraJet EP w/ESC & Delta Mix - Manual (Page 7)

7
Locate all motor mount parts as located in the picture below.
Step 1. Assemble the motor mount, but do not glue any of the
motor mount parts together!
Step 2. Mix an adequate amount of 12-minute epoxy and apply
to the dowels.
Step 3. Apply epoxy to the motor mount recesses located in the
center of the fuselage and install the motor mount to the fuselage.
Step 4. Use masking tape to hold the motor mount in place on
the fuselage.
Installing the Motor Mount