E-flite Ascent 450 Brushless PNP - Manual (Page 3)

3 E-flite Ascent PNP Assembly Manual
Contents of Kit/Parts Layout
Replacement Parts
EFL2701 Wing Set
EFL2702 Fuselage
EFL2703 Tail Set
EFL2704 Canopy
EFL2705 Wing Tube
Battery and Charger Selection
EFLB12503S 1250mAh 3S 11.1V 20C LiPo, 13GA EC3
EFLC3005 Celectra ™ 1- to 3-cell Li-Po Charger
EFLC505 1–5S Balancing Li-Po Charger
Covering Colors
HANU973 Lite White
HANU954 Transparent Blue
HANU964 Lite Clear
HANU881 Silver
Required Radio Equipment
You will need a minimum 4-channel transmitter and micro
receiver. We recommend the crystal-free, interference-free
Spektrum ™ DX6i 2.4GHz DSM ® 6-channel system, which includes
a micro receiver.
Complete Radio System
SPM6600 DX6i DSM 6CH Radio System
Or
SPM6000 AR6000 DSM 6-Channel Park Flyer Receiver
(DX6, DX6i and DX7)
Or
SPM6100E AR6100E DSM2 ™ Microlite 6-Channel Receiver,
Air (DX6i and DX7 users only)
Required Tools and Adhesives
Tools & Equipment
Ball driver: 3/32-inch Felt-tipped pen
Phillips screwdriver: #1 Painter's tape
Mixing sticks Mixing cup
Ruler Square
Hobby knife #11 blades
Rubbing alcohol Paper towels
Sandpaper
Adhesives
Medium CA Threadlock
6-Minute Epoxy (HAN8000)