E-flite Ascent 450 Brushless PNP - Manual (Page 12)

12 E-flite Ascent PNP Assembly Manual
 2. Use a felt-tipped pen to transfer the edge of the
fuselage onto the bottom of the fin.
 3. Use a felt-tipped pen to trace the outline of the fin on
the top of the fuselage.
 4. Use sandpaper to remove the paint from the top of the
fuselage. This is necessary to provide a bonding surface
between the fin and fuselage.
Hint: Use tape to outline the area to sand to prevent
removing paint from the surrounding area.