E-flite Mini Funtana 3D EP ARF - Manual (Page 37)

37
Cowling Install
Required Parts
Fuselage Cowling
12x6 propeller Spinner
3mm lock nut 3mm washer
2mm x 8mm wood screw (4)
Required Tools and Adhesives
Hobby knife
Phillips screwdriver (small)
 1. Slide the cowl onto the fuselage. Center the
motor shaft in the opening. Check to make
sure the propeller and spinner will not interfere
with the front of the cowl and there is adequate
clearance. Secure the cowl to the fuselage
using the 2mm x 8mm wood screws and a
phillips screwdriver.