E-flite Mini Funtana 3D EP ARF - Manual (Page 14)

Aileron Servos and Linkages
Required Parts
Wing panel (right and left)
Micro control connector (2)
2mm x 4mm screw (2)
4" (100mm) pushrod (2)
Control horn and backplate (2)
Servos: JR 241 Sub-micro servo (JRPS241) (2)
Large Arm w/Screws (JRPA212) (2)
Required Tools and Adhesives
Hobby knife 6-minute epoxy
6" (150mm) servo extension (2) String
Phillips screwdriver (small)
 5. Work the aileron up and down several
times to work in the hinges and check for
proper movement.
 6. Repeat Steps 1 through 5 for the
remaining aileron.
14