E-flite Mini Funtana 3D EP ARF - Manual (Page 11)

Aileron Hinging
Required Parts
Wing (left and right) Aileron (left and right)
CA hinges (8)
Required Tools and Adhesives
3/32" (2.5mm) drill bit Drill
T-pins Thin CA
Paper towel
 1. Locate the positions for the hinges. Drill a
3/32" (2.5mm) hole in the center of each slot.
This creates a tunnel for the CA, allowing the
CA to penetrate into the hinge better, bonding
the hinges more securely.
11