E-flite Mini Funtana 3D EP ARF - Manual (Page 3)

3
Additional Tools and Adhesives
Tools
Square T-pins
Hobby knife Drill
Ruler Felt-tipped pen
Hex wrench: 3/32"
Phillips screwdriver (small)
Drill bit: 3/32" (2.5mm), 1/8" (3mm)
Adhesives
Thin CA Medium CA
6-minute epoxy Canopy glue
Threadlock
Other
Heat gun Paper towels
Wax paper 150–180 grit sandpaper
Additional Required Equipment
Recommended JR® Systems
Radio: JR 4-channel
Servos: JR 241 Sub-micro servo (JRPS241) (4)
Receiver: JR R610M 6-channel micro FM Rx (JRPR610 or
JRPR610UL)
Or purchase:
JR Quattro Lite system (JRP4487) and
(2) JR 241 Sub-micro servo (JRPS241)
Other Radio accessories:
Large Arms w/Screws (JRPA212) (2)
6" (150mm) Servo Extension (JRPA095) (2)
9" (230mm) Servo Extension (JRPA097) (2)
Battery and Speed Control Requirements
Li-Po Battery: 11.1V 1800–2100 3-Cell (EFLB1025,
EFLB1035 or THP21003S)
Speed Control: E-Flite 20 amp brushless ESC (EFLA311) or
Castle 25 amp brushless ESC (CSEPHX25)
Motor/Gearbox/Propeller
6.6:1 gearbox (included) (EFLM221)
12x6 Propeller (included) (EFLP1260)
Park 400 Brushless Motor, 4200KV (EFLM1100)
Park 400 Brushless Motor, 3700KV (EFLM1105)