beautypg.com

E-flite Mini Funtana 3D EP ARF User Manual

Page 19

background image

2. Remove the hatch from the fuselage. Slide

the wing panel with tube into position on the

fuselage.

Note

: There are two locations for the wing tube

in the fuselage. Use the rear hole (rearward

wing location) at this time. Details regarding the

different wing positions are described under the

Center of Gravity section.

19

3. Slide the remaining wing panel into position.

Secure the panels using 4-40 x 1/2" socket

head screws with #4 washers (silver) using a

3/32" hex wrench.

See also other documents in the category E-flite Air equipment: