E-flite Mini Funtana 3D EP ARF - Manual (Page 18)

 8. Turn on the radio system and center the aileron
trim and stick. Make sure the aileron servo is
operating properly using the transmitter. Slide
the pushrod wire through the micro connector.
Install the servo arm 90-degrees to the servo.
Center the aileron, and secure the position of
the wire using the 2mm x 4mm screw and a
phillips screwdriver.
Wing Installation
Required Parts
Fuselage Wing (right and left)
Wing tube #4 washer (silver) (2)
4-40 x 1/2" socket head screw (2)
Hex wrench: 3/32"
 1. Slide the wing tube into a wing panel.
18