E-flite Extra 260 3D 480 ARF - Manual (Page 30)

0 E-flite Extra 260 480 ARF Assembly Manual
 4. Use Formula 560 canopy glue to glue the canopy to
the fuselage. Use masking tape to hold the canopy in
position until the glue fully cures.
 5. With the aircraft fully assembled, install the battery
into the battery compartment. Secure the battery using
the hook and loop tape and the hook and loop straps.
Note: Place a piece of hook and loop tape on the bottom
of the battery and on the fuselage where the battery
rests. This will keep the battery from shifting forward or
backward during extreme maneuvers.