beautypg.com

E-flite Extra 260 3D 480 ARF User Manual

Page 27

background image

2

E-flite Extra 260 480 ARF Assembly Manual

4. Install the micro control connector onto the

elevator servo arm. Pass the elevator pushrod wire

through the connector. With the radio on and elevator

trim centered, center the elevator. Secure the elevator

pushrod wire using the 2mm x 4mm screw and a small

Phillips screwdriver.

Note: The Extra 260 is designed to use an optional

pull-pull rudder linkage when using a lightweight motor

and battery. The items for the pull-pull system are

available separately.

5. Repeat Steps 1 through 4 for the rudder servo and

linkage using the 5-inch (127mm) pushrod wire.