beautypg.com

E-flite Extra 260 3D 480 ARF User Manual

Page 19

background image

1

E-flite Extra 260 480 ARF Assembly Manual



8. Turn on the radio system and center the aileron trim

and stick. Make sure the aileron servo is operating

properly using the transmitter. Slide the pushrod wire

through the micro connector. Install the servo arm parallel

to the aileron hinge line. Center the aileron, and secure

the position of the wire using the 2mm x 4mm screw and

a Phillips screwdriver.

9. Use side cutters to remove any excess wire, leaving
about

1

/

4

(5mm) excess wire past the control connector.