E-flite Extra 260 3D 480 ARF - Manual (Page 20)

20 E-flite Extra 260 480 ARF Assembly Manual
Wing Installation
Required Parts
Fuselage Wing (right and left)
Wing tube #4 washer (silver) (2)
4-40 x 1 / 2
-inch machine screw (2)
Required Tools and Adhesives
Hex wrench: 3 / 32
-inch
6-minute epoxy Pliers
 1. Slide the wing tube into a wing panel.
 2. Remove the hatch from the fuselage. Slide the wing
panel with tube into position on the fuselage.
  3. Slide the remaining wing panel into position. Secure
the panels using 4-40 x 1 /
2
-inch machine screws with #4
washers (silver) using a 3 / 32
-inch hex wrench.
  4. Repeat Steps 2 and 3 for the remaining wing panel.