beautypg.com

E-flite Apprentice 15e PNP User Manual

Page 21

background image

21

E-flite Apprentice PNP Assembly Manual

2. Slide the spinner backplate on the propeller

adapter.

3. Install the washer on the propeller shaft.

4. Thread the nut on the propeller adapter. Use an

adjustable wrench to tighten the nut. Make sure the

nut is tightened properly so the propeller does not

depart from your model during flight.

5. Snap the spinner cone on the spinner backplate.

It should snap on the backplate using a little force.