Watts W100F - Manual (Page 27)

Page 2 WS1TC & WS1.25 TC Manual WS1TC & WS1.25 TC Manual Page 2
Drain Line – 3/4”







Water
Flow
Proper DLFC orientation
directs water flow towards
the washer face with
rounded edge.
Drawing No. Order No. Description Quantity
1
H4615 Elbow Locking Clip
1
2 PKP10TS8-BULK Polytube insert 5/8 Option
3 V3192
WS1 Nut ¾ Drain Elbow
Option
4 V3158-01 WS1 Drain Elbow ¾ Male 1
5 V3163
O-ring 019
1
6 V3159-01 WS1 DLFC Retainer ASY 1
7
V3162-007
WS1 DLFC 0.7 gpm for ¾
One DLFC
must be
used if ¾
fitting is
used
V3162-010
WS1 DLFC 1.0 gpm for ¾
V3162-013 WS1 DLFC 1.3 gpm for ¾
V3162-017
WS1 DLFC 1.7 gpm for ¾
V3162-022 WS1 DLFC 2.2 gpm for ¾
V3162-027
WS1 DLFC 2.7 gpm for ¾
V3162-032 WS1 DLFC 3.2 gpm for ¾
V3162-042
WS1 DLFC 4.2 gpm for ¾
V3162-053 WS1 DLFC 5.3 gpm for ¾
V3162-065
WS1 DLFC 6.5 gpm for ¾
V3162-075 WS1 DLFC 7.5 gpm for ¾
V3162-090
WS1 DLFC 9.0 gpm for ¾
V3162-100
WS1 DLFC 10.0 gpm for ¾
Valves are shipped without drain line flow control (DLFC) - install DLFC before using. Valves
are shipped without ¾ nut for drain elbow (polytube installation only) and 5/8" polytube insert
(polytube installation only).