Bush Hog TOUGH 286 - Manual

Bush Hog
®
TOUGH
280 Series Rotary Cutters
BUSH HOG ® TOUGH FeaTUReS
TOUGH 10 Gauge Fabricated Decks
TOUGH 7 Gauge
Strongbacks
TOUGH Full Length Replaceable
Skids
TOUGH 5 Year Gearbox
Limited Warranty
TOUGH Powder Coat Paint
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 14
Model 287
Model 286
Model 285
MODeLS 285 286 287
Cutting Width 5 ft 6 ft 7 ft
Cutting Capacity 2 1/2 inch Diameter 2 1/2 inch Diameter 2 1/2 inch Diameter
Cutting Height 1 1/2 to 10 1/2 inches 1 1/2 to 10 1/2 inches 1 1/2 to 10 1/2 inches
Dimensions (width x length) 65 x 102 inches 77 x 114 inches 89 x 126 inches
Type Hitch 3 Pt. Category I, 3 Pt. Category I, 3 Pt. Category I & II or
Cat. II pins optional Cat. II pins optional Cat I & II QH
Deck Thickness 10 gauge 10 gauge 10 gauge
Sidebands 1/4 x 8 inches 1/4 x 8 inches 1/4 x 8 inches
Driveshaft ASAE Category 4 ASAE Category 4 ASAE Category 4
Gearbox 110 HP 110 HP 110 HP
Tractor PTO Speed 540 RPM 540 RPM 540 RPM
Driveline Protection Slip Clutch Standard Slip Clutch Standard Slip Clutch Standard
Blade Holder(s) Round Round Round
Blades 1/2 x 4 inch uplift 1/2 x 4 inch uplift 1/2 x 4 inch uplift
Blade Tip Speed 15,551 FPM 14,877 FPM 14,514 FPM
Tires Laminated Laminated Laminated, dual or single
Minimum Tractor HP 30 PTO 40 PTO 50 PTO
Front and Rear Deflectors Standard Equipment - Front Belting and Rear Bands, optional chain shielding, all 3 models
approximate Weight 785 lbs 942 lbs 1127 lbs
Warranty 1 year limited warranty with a 5 year gearbox limited warranty
Options Chain Shielding Chain Shielding Chain Shielding
Category II hitch pins Category II hitch pins
FeaTUReS Available in major tractor colors
Note: You have a choice of single or dual tailwheels on Model 287 for semi-mount and quick hitch, as well as a choice of a ratchet assembly or hydraulic cylinder.