Bush Hog 2515 - Manual

Bush Hog
®
TOUGH
2515 Flex Wing Rotary Cutters
Recommended Tractor HP Minimum 50 To Maximum 120 PTO
BUsH HOG ® TOUGH FeaTURes
TOUGH eZ Clean sloped 10 Gauge Deck
TOUGH 7 Gauge strongbacks
TOUGH
1/4 Inch sidebands
TOUGH Greaseable axle Pivot Points With Bushings
TOUGH Heavy Duty axle With Heavy Duty Turn Buckles
TOUGH Driveline safety Retaining Rings
TOUGH 5 Year Gearbox Limited Warranty
TOUGH Powder Coat Paint
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 32
MODeL 2515
Cutting Width 15 ft
Cutting Capacity 2 inch Diameter
Cutting Height 2 to 14 inches
Overall Width and Length (from Clevis to Wheel Hub at Transport Height) 15 ft 6 inches x 14 ft 1 inch
Transport Width (from wing skid to wing skid) 7 ft 2 inches
Tractor PTO 540 RPM/1000 RPM
Minimum Tractor HP 50 PTO
Deck Thickness 10 gauge
side Bands 1/4 x 9 inches
Gearbox HP Transfer - 160, Center - 110, Wings - 110
PTO Driveline ASAE Cat. 5 (540 RPM), ASAE Cat. 4 (1000 RPM)
Wing Driveline ASAE Cat. 4
slip Clutches (3) 2 Friction Plate Clutches
Blade Tip speed 15,268 FPM
Blades 1/2 x 4 inch Uplift with 6 inch Overlap
Type Hitch Self Leveling Pull Type with Swivel Clevis
Wing Flex (Operating) 87° Up to 22° Down
Tires Choice of Laminated Tire, Used Aircraft Tire, Foam-filled Used Aircraft Tire, or Pneumatic 15 inch Wheel
axles Greaseable pivot points with bushings
Wheel shock Protection Independent springs on the deck
Deflectors Front and Rear Belting or Chains, See Model
Options Chain Shielding, Valve & Stand Kit
Warranty 1 year limited warranty with a 5 year gearbox limited warranty
FeaTURes • Quick detach gearbox shields
BUsH HOG eXCLUsIVe: Driveline safety retaining rings