Bush Hog 3210 - Manual

Bush Hog
®
TOUGH
3210 Series Rotary Cutters
BUSH HOG ® TOUGH FeaTUReS
TOUGH 10 Gauge Deck Construction
TOUGH 7 Gauge Strongbacks
TOUGH
1/4
Inch Sidebands
TOUGH Rubber Cushioned axle arms
TOUGH 5 Year Gearbox Limited Warranty
TOUGH Powder Coat Paint
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 24
Model 3210
MODeLS 3210 3210 Offset
Cutting Width 10 1/2 ft 10 1/2 ft
Cutting Capacity 2 1/2 inch diameter 2 1/2 inch diameter
Offset Beyond Tractor Center Line N/A 7 ft 10 inches
(Offset Models Only)
Dimensions (width x length) 11 ft 1 inch x 9 ft 10 inches (Lift) 11 ft 1 inch x 13 ft 5 inches (Pull)
Transport Width 10 ft 11 inches 10 ft 11 inches
Type Hitch 3 Point Category II & III Standard and 3 Point Category II & III Semi-Mount
Quick Hitch, Cat. II & III Semi-Mount and Pull Type (self leveling)
and Center Pull (self leveling)
Cutting Height 2 to 13 inches 2 to 13 inches
Deck Thickness 10 gauge 10 gauge
Side Bands 1/4 x 10 inches 1/4 x 10 inches
Minimum Tractor HP 60 PTO (Lift), 50 PTO (Pull) 55 PTO (Semi-Mount), 50 PTO (Pull)
Driveline ASAE Cat. 5 (540 RPM - Lift, Pull and ASAE Cat. 5 (540 RPM - Pull and Semi-Mount)
Semi-Mount), ASAE Cat. 4 (1000 RPM Pull)
Cross Shaft ASAE Cat. 5 Rubber Element ASAE Cat. 5 Rubber Element
Gearbox HP (3) 205 Center, 190 Outboard (2) 205 Main, 190 Outboard
Tractor PTO Speed 540/1000 RPM 540 RPM
Driveline Protection 4 Plate PTO Slip Clutch 4 Plate PTO Slip Clutch
Height adjustment Manual or hydraulic Manual or hydraulic
Blade Holder(s) Round Round
Blades 1/2 x 4 inches - Uplift 1/2 x 4 inches - Uplift
Blade Tip Speed 16,881 FPM/540 RPM; 17,400/1000 RPM 16,881 FPM/540 RPM; 17,400/1000 RPM
Tires Laminated, Pneumatic, Aircraft Laminated, Pneumatic, Aircraft
axles Rubber Cushioned, Choice of Single or Dual Axles for Pull Models
Deflectors Front Belting, Rear Band, Optional Chains Front Belting, Rear Band, Optional Chains
Safety Tow Chain Standard for Pull Models Standard for Pull Models
approximate Weight (Pull with Single Axle) 2741 lbs 2624 lbs
Options Chain Shielding, Third Tailwheel for Lift or Semi-Mount Models
Warranty 1 year limited warranty with a 5 year gearbox limited warranty
FeaTUReS • High blade tip speeds • Deep sidebands