BenQ PB6240 - Manual (Page 19)

Connection 15
Connection
When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
In the connections shown below, some cables are not included with the projector
(see page
6 ). They are commercially available from electronics stores.
Connecting a computer
• A Mac adapter (an optional accessory) is needed if you are connecting to Macintosh
computers.
• Many laptops do not turn on their external video ports when connected to a projector.
Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off.
Locate a function key labeled CRT/LCD or a function key with a monitor symbol on the
laptop. Press FN and the labeled function key simultaneously. Refer to your laptop’s
documentation to learn your laptop’s key combination.
Connecting Component Video devices
The projector is capable of accepting a Component Video signal. Use a Component Video-
VGA (D-sub) cable (an optional accessory) to display these images.
S-VIDEO
VIDEO
AC-INLET
D-SUB OUT
D-SUB/COMP IN
AUDIO
VGA cable
USB cable
Audio cable
VGA cable
S-VIDEO
VIDEO
AC-INLET
D-SUB OUT
D-SUB/COMP IN
AUDIO
AV equipment
Component Video Cable
(optional accessory)