Controls and functions, External control panel – BenQ PB6240 User Manual
Page 13
Introduction
9
Controls and functions
External control panel
13
12
10
9
11
5
3
4
8
7
2
1
6
1.
Power (Refer to pages
and
for
more information.)
Turns the projector on or off.
2.
Source (Refer to page
for more
information.)
Sequentially selects the input signal
RGB/YP
b
P
r
, Video or S-Video.
3.
3 Left
4.
Right
4
When the on-screen menu is not
activated, #3 and #4 function as
Keystone -/+ hot keys.
Refer to page
for more information.
5.
5Exit
Exits and saves the menu settings.
6.
6Menu
Turns the on-screen display control
menu on.
When the on-screen menu is activated,
the #3 to #6 buttons are used as
directional arrows to select the desired
menu items and to make adjustments.
Refer to page
for more information.
7.
for more
information.)
Automatically determines the best
picture timings for the displayed
image.
8.
Blank (Refer to page
for more
information.)
Used to hide the screen image. You can
press Blank again to bring the image
back.
9.
Power indicator light (Refer to page
for more information.)
Lights up or flashes when the projector
is under operation.
10.
Temperature warning light (Refer to
page
for more information.)
Flashes red if the projector’s
temperature becomes too high.
11.
Lamp indicator light (Refer to page
for more information.)
Indicates the status of the lamp. Lights
up or flashes when the lamp has
developed a problem.
12.
Zoom ring (Refer to page
for more
information.)
Adjusts the size of the image.
Rotate clockwise to enlarge the image
or rotate counter-clockwise to make
the image smaller.
13.
for more
information.)
Adjusts the focus of the projected
image.