BenQ PB6240 - Manual (Page 17)

Positioning your projector 13
Obtaining a preferred projected image size
The distance from the projector lens to the screen, the zoom setting, and the video format
each factors in the projected image size. BenQ has provided separate tables of dimensions
for both 16:9 and 4:3 screen ratios to assist you in determining the ideal location for your
projector.
1. Determine the aspect ratio of your screen (4:3 or 16:9).
2. Determine the projection distance allowed in your room. Install the projector at a
proper distance from the screen.
3. Refer to the table of 4:3 or 16:9 Screen Size depending on your screen ratio. Locate the
suitable value in the column of “Distance from Screen”. In the same row, you will find
the maximum and minimum projected image sizes.
4. Determine the preferred height of your projector.
For example, if you are using a 4:3 screen with 2.5 meters projection distance, the maximum
image size is close to 1.91 meters diagonal.
If you place the projector above or below the screen, you have to tilt it down or up to center
the image on the screen after turning the projector on. In these situations, some image
distortion will occur. Use the Keystone function to correct the distortion. See page
20 for
keystone correction.
Maximu
m zoom
Minimu
m zoom
Focus ring
Zoom ring
Pro
ject
ion
dis
tan
ce