Banner Q45 Series - Manual (Page 7)

Q45XDN
P/N 46655 rev. C 7
™
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Mounting Brackets
SMB30S SMB30C
• 30 mm split clamp bracket
• Black reinforced thermoplastic polyester
• Includes stainless steel mounting hardware
• 12-gauge, stainless steel, right angle
mounting bracket with a curved mounting
slot for versatility and orientation
• Clearance for M6 ( 1 / 4 ") hardware
SMB30MM
• 30 mm, 12-gauge, stainless steel bracket
with curved mounting slots for versatility
and orientation
• Clearance for M6 ( 1 / 4 ") hardware
63.5 mm
(2.50")
50.8 mm
(2.00")
M5 x 0.8
x 30 mm
Screw (2)
Not Shown:
(2) M5 x 0.8 x 60 mm
screws are supplied for
clamping bracket together
43.2 mm
(1.70")
25.4 mm
(1.00")
82.5 mm
(3.25")
12.2 mm
(0.48")
56.0 mm
(2.20")
63.0 mm
(2.48")
45.0 mm
(1.77")
2.5 mm
(0.10")
31.5 mm
(1.24")
Nut Plate
M5 x 0.8
x 80 mm
Screw (2)
13 mm
(0.5")
13.5 mm (0.53")
35.1 mm
(1.38")
35.1 mm
(1.38")
69.9 mm
(2.75")
7.1 mm
.28 x 90
° (2 Slots)
R 25.4 mm
(1.00")
ø30.1 mm
(1.19")
57.2 mm
(2.25")
25.4 mm
(1.00")
25.4 mm
(1.00")
ø 6.4 mm
(0.25" dia.)
57.2 mm
(2.25")